TWRPS-LBS

The Well Regulated Power Supply LiFePo4 Battery System

The TWRPS-LBS is a complete LiFePo4 battery power supply management system. There are 3 available boards: the power unit TWRPS-LBS-P, the main board TWRPS-LBS-M and the daughter board TWRPS-LBS-D.

TWRPS-LBS-P power supply unit

The TWRPS-LBS-P is the PSU board intended to recharge the batteries of the main and the daughter boards. It’s controlled by the main board.

Features:

Input: 115-230 VAC

Output voltage:

– linear supply to recharge the batteries of the main and the daughter board

– linear supply to power the TWSAFB-LT FIFO Lite board

– regulated supply to power the oscillators while recharging the batteries, to never shut down the oscillators

Board size: 208mm x 170mm        

Suitable box: HiFi 2000 1GX283N GALAXY 283/2U FRONT 3MM BLACK DEPTH 230MM

Board options: bare PCB only

Note: almost all parts are through hole, a few SMD parts only

Download

TWRPS-LBS-M main board

The TWRPS-LBS-M is the main board intended to supply oscillators, frequency doublers, FIFO buffer and so on. It provides the control for the whole system.

Features:

Input: PSU TWRPS-LBS-P

Output voltage:

– 3.3V to 16.5V, typically for oscillators

– 2x 3.3V to 6.6V, typically for DAC

– 3.3V, for LVCMOS digital devices (for example the clock section of the FIFO)

– 5V 500mA linear regulator to supply other devices like USB to I2S, and so on

Board size: 260mm x 195mm        

Board options: finished and semi-finished

Note: supplied without batteries and battery holders

Remote power On-Off

No switching devices or active oscillators during listening

No RF emissions at all (no multiplexed display, microcontroller sleeps in stand-by mode during listening)

Download

TWRPS-LBS-D daughter board

The TWRPS-LBS-D is an extra board intended to add more rails to the main board. It’s controlled by the main board processor.

Features:

Input: TWRPS-LBS-M main board

Output voltage:

2x 3.3V to 13.2V, typically for DAC analog stage

Board size: 184mm x 195mm        

Board options: finished and semi-finished

Note: supplied without batteries and battery holders

Fits the main board with a single connector

No switching devices or active oscillators during listening

No RF emissions at all (no multiplexed display)

Download