Reply To: about aluminium box and Master Clock Driscoll oscillator/ Doubler

Posted byThe Well Audio

› Forum › Digital line › about aluminium box and Master Clock Driscoll oscillator/ Doubler › Reply To: about aluminium box and Master Clock Driscoll oscillator/ Doubler

01/05/2023 at 19:04 #2400
The Well Audio
Participant

    1. All surfaces of the aluminum box should be in contact with each other to prevent EMI/RFI.
    Since the box is anodized you have to scratch a little the surfaces to get better contact.

    2. It’s not a problem since the grounds of the power plug and SMA are at the same potential.